MFC and MDF are quite popular materials used in making vanities for bathrooms and also kitchen cabinets. Both materials have a texture that is comfortable to the touch. But do you know MFC vs MDF, which is better to use for making furniture?
These two materials have their own distinct characteristics. Therefore, you need to know in advance what the differences are, as well as the advantages and disadvantages based on several categories so that you don’t make the mistake of buying a quality product.
Comparison of MFC vs MDF
What is the difference between MFC vs MDF? Melamine Faced Chipboard (MFC) is engineered wood made from woodchips and resin. This melamine is applied to paper with a wood-like pattern and then printed. Then it is glued to chipboard, resulting in a finished product that has a pattern similar to wood.
Meanwhile, Medium Density Fiberboard (MDF) is a product made from solid wood residues that have had their fibers and resin cut, then put together using wax. The process of compacting this fiberboard board is through a high pressure process.
This process makes it emit formaldehyde which can be harmful to health, because fiberboard contains carcinogenic elements and can easily mix with air. Especially if the furniture is damaged.
To find out more clearly about the comparison of MFC vs MDF, below we share the differences based on several categories.
1. Durability of MFC vs MDF
Which has better durability, MFC vs MDF? The answer is MFC. Melamine is made of durable layers and a quality structural core.
Therefore, it is suitable for implementation in hot and humid rooms such as kitchens and bathrooms.
In addition, melamine contains a wood core that is compressed at high temperatures, making it easy to clean. So, if your kitchen is full of stains and dirt from cooking, you don’t need to worry that it will be difficult to clean it.
Unfortunately, if exposed to large amounts of water, the melamine surface can become damaged. When melamine absorbs water, it swells and loses much of its structural integrity.
Meanwhile, fiberboard is difficult to bend so it cracks easily. Additionally, fiberboard is not resistant to extreme heat because this product is made of resin or wax.
Therefore, avoid placing fiberboard in areas near heaters, fireplaces, radiators, ovens and stoves.
FiberboardIt also doesn’t have good water resistance. When immersed in water, it will become damaged. However, when you lift it out of the water, the fiberboard will expand and then shrink.
However, despite these shortcomings, fiberboard is strong enough to be used as a basis for furniture. Fiberboard is also easy to get neat particle board cut results. Therefore, fiberboard is suitable for ornaments, reliefs and interior doors.
2. Ability to Paint
Melamine is easy to paint because it has a smooth and neat surface. Because of this, this product is available in a variety of colors to choose from. In fact, you can find almost all colors in this product.
Unlike MDF, this particle board has a rougher surface. This makes it difficult to paint so it doesn’t have a variety of colors to choose from.
3. Design Diversity
MFC is available in various designs that you can choose from. The designs provided are attractive enough to beautify your kitchen and bathroom.
But unfortunately, the design of fiberboard products is not as attractive as melamine products. The design is stiffer and also less varied.
4. Heavy
MFC has a greater weight than MDF. The weight of this fiberboard is quite light but strong and stable, so it is suitable for implementation in products that are installed by hanging.
However, if you choose melamine, you need to add hinges or drawer slides if you want to place the product hanging.
Unfortunately, this way of laying melamine can damage the product itself, because it is not very strong in holding the load.
5. Coating
The process of making melamine can involve re-coating or replacing door, drawer or cabinet facades. This can happen if something goes wrong in the production process.
The process of making melamine is by applying resin to the outside of solidified wood particles. This makes it have a hard layer on the top.
This hard layer can cause the melamine surface material to peel or crack. So re-coating is needed so that the surface looks smooth. However, this hard layer makes melamine resistant to scratches and impacts.
As with melamine, the surface of fiberboard can also quickly become damaged due to peeling. This occurs if the product is compressed excessively, causing the overall integrity of the board to be permanently damaged and beyond repair.
6. Ease of Manufacturing
MFC is made from thick carcass panels. However, this makes it difficult to cut and shape.
Unlike MDF, fiberboard is easier to cut and shape, so it takes a short time to make.
7. MFC finish
Melamine products do not require a finishing process. In addition, if the unit design is complete and ready to be assembled, no additional maintenance is required. This will save more time for designing chipboard. The final result can be neater and free of stains.
8. Installation
There are several risks that you will face if you choose MFC, namely the installation process. This process must be carried out by an expert because it requires the correct method so that the melamine does not split. If it splits, the heartwood will be compressed and sensitive to moisture.
9. MFC vs MDF Price
Melamine has a cheaper price than MDF. This is because the manufacturing process is easier, and the basic materials for making it are also cheaper.
Costs for ordering and installing melamine can be reduced. You can pay a more affordable price, because there is no charge for installation costs such as cabinet drawers or cupboards made of solid wood.
Fiberboard is just as affordable, but more expensive than MFC. However, fiberboard boards are easy to supply which makes them easy to find in large quantities.
Get Quality MFC and MDF at PT Rimba Particle Indonesia
PT Rimba Particles Indonesiais a manufacturer of high quality particle board in Indonesia. We provide the best MFC and MDF particle boards for you.
Our company’s mission is to utilize wood waste to produce useful, innovative products.
Therefore, the particle board we provide is very environmentally friendly and free from environmental pollution that can harm health and nature.
If you use our services, we can complete your order according to special specification particle board based on your request. We can also develop various product variations to meet your particle board needs.
To get satisfaction from customers who have used our services, we always prioritize high consistency to produce quality product output.
We will also ensure that orders are delivered on time based on our factory work procedures.
Interested in using our services to get quality particle board? Visit the website or come directly to our head office in Mororejo Village, Kaliwungu, Kendal, Central Java.
Don’t forget to keep following our website to get other interesting information, such as this MFC vs MDF information!
